SECO MANUFACTURING COMPANY INC.introduced anNGSapproved stainless steel monument adapter. The adjustable tilt monument adapter has a 3.20-in diameter and an overall height of 3.036 in. It includes a removable brass 5/8-11 male stud that is adjustable in azimuth and held in location by two set screws. The adapter is leveled by three adjusting screws with a tilt range of ±7 degrees and has a height above the pivot point to the stud shoulder of 0.0350 m. The height below the brass 5/8 stud to the shoulder is 0.463 in. The adapter’s base fits standard U.S. 1.5-in pipe threads and is 1.125-in deep.