Tallysman Wireless Releases TW33XX GPS L1/GLONASS Antennas
The TW33XX series features a patch element with 40 percent wider bandwidth than typical single feed patch antennas so that the GPS-L1 and GLONASS signals are included in the 1dB received power bandwidth of the patch antenna.
The family includes a LNA with a 1dB NF, and with either 40dB or 28dB gain. Both gain versions are available with optional brick-wall pre-filters to protect against saturation by high level sub-harmonics and L-band signals. The entire product family features a 2.5V to 10V operating supply range and meets all requirements for newer high performance GPS chip-sets and receiver types.
Other features include robust IP67 compliant housings with a white metal base, double panel mount nuts and an optional L-bracket for fixed mounts.
- Low noise LNA: 1 dB typical
- High rejection mid-section SAW filter
- Available Pre-filter
- High gain: 28 dB or 40dB versions.
- Wide voltage input range: 2.5 to 16 VDC
- IP67 weather proof housing
- Low Power: 9mA typ (28dB), 14mA typ (40dB).
- Through-hole or L-bracket mount
TW3320/22 – 28dB/Brick-wall pre-filter
TW3370/72 – 40dB/Brick wall pre-filter/conical radome
Each model is available with a conical radome for timing applications, or a flat top radome for mobile telematics applications.